Applications in Automotive Industry 글 편집

배너_Artboard 1 copy 6.png

Use RecurDyn multibody dynamics simulation to develop your vehicles or automotive components. RecurDyn is an innovative simulator for:

Suspension, power steering, powertrain, brake and others...

Are you developing vehicles or automotive components?

If so, you may have validation, troubleshooting, or other issues like:

  • Noise and vibration
  • Ride Comfort, Steering Stability, Steering Response
  • Durability of the components
  • Fuel efficiency
  • Reduction of the development time and cost

Multibody dynamics simulation using RecurDyn is used in automobile and auto parts development for such things as:

  • Enhancing the driving performance of vehicles
  • Power steering system performance enhancement
  • Ride comfort performance
  • Selection of F/R suspension types and hard points location
  • Suspension compliance optimization (for example: bushings, springs, shocks)
  • Powertrain performance including NVH evaluation including engines, transmissions, drivelines
  • Evaluation of various components such as gears, bearings, belts and chains
  • Braking performance on various road conditions (dry, rainy, snowy)
  • Dynamic behavior and durability analysis of parts like side brakes, clutches, brake pads
  • NVH and transmission error of Transmissions, Transfer Cases, and Differentials
  • Lubrication performance of drivetrain
  • Improvement of durability for CV joint boots
  • System analysis of various moving components like
    • Passenger seats, doors, sliding doors, tail gates, trunk lids, power windows, wipers


▶ Driving Simulation

Driving simulation of a vehicle
with the steering system and suspension

Virtual suspension test including tire

▶ Powertrain Simulation

Engine and transmission simulation with geartrain and other components

Engine simulation with Piston, crankshaft, belt and chain

▶ Simulation of other components

Brake device with the contact between flexible parts

Ball screw mechanism in a power steering

▶ Multiphysics vehicle simulation using Multibody Dynamics and CFD

More powerful than FSI (Fluid Structure Interface)

Oil sloshing in a fuel tank and its impact on the bulkhead and the tank surface

Driving simulation on a flooded road using MBDxCFD co-simulation

제목_case studies.jpg

Click the image for the detailed case studies, including powertrain simulation, CV joint boot simulation, brake simulation, and other automotive components.

RecurDyn case study - Toyota

A vehicle on a flooded road

RecurDyn case study - GearLAB

e-Axle simulation

RecurDyn case study - hyundaimotors

Transmission simulation

RecurDyn Case study - mistequay

CV Joint Boot simulation


Drive-axle simulation


Forklift simulation

List of the presentations for each country (presentation materials are not available)


Honda - Study on the Rotating Vibration of Camshaft in High Rotation Area of DOHC 4-cylinder engine


Aisin - An introduction to co-simulation using RecurDyn and MATLAB/Simulink – Power sliding door

BorgWarner - Chain system using RecurDyn


Toyota - Development of forecasting technique for water level in an engine room while driving through flood water using co-simulation of MBD-CFD

Hyundai Motors - Development of flow analysis method of transmission using particle method

IWIS antriebssysteme GmbH & CO.KG - Multibody Simulation for Optimizing Chain Drives

BOSCH - Dynamic Simulation of Non- Harmonic Excited Compression Springs with a Newly Developed Spring Toolkit

ZF TRW - Automated Design Study for Reducing Transient Noises in Worm Drive Steering Systems


UNIVANCE - Co-simulation between RecurDyn and Particleworks for development of automobile transfer


JTEKT - Dynamic behavior analysis related to torque loss of needle roller bearing


Hyundai Motors - Dynamic analysis of gear train rattle condition in automotive manual transmission using RecurDyn


Porsche - Application of RecurDyn at Porsche Engineering


Hyundai Motors - Computer Aided Analysis and Robust Design of Brake Judder

제목_how to use.jpg

Click the image to watch how to use RecurDyn for vehicle simulation



Danny Shin

or you can find FunctionBay branches or agencies from the below link in your region.

제목_request button.jpg