Group Ball Bearing Property

 

Figure 1  Definition of Bearing Property

 

Figure 2  BallBearingGroup dialog box [Group Ball Bearing Property]

 

     Bearing Body

    Inner Ring Property: Defines the material property of inner ring.

Figure 3  Bearing Body Info dialog box

 

    Outer Ring Property: Defines the material property of outer ring and characteristic values for Beam Force. For more information, click here.

Figure 4  Bearing Body Info dialog box

 

    Ball Property: Defines the material property of ball.

 

     Bearing Contact: Defines characteristic values for each contact. For more information, click here.

    Inner Ring and Ball Contact Property: The sphere in torus contact is used.

    Outer Ring and Ball Contact Property: The sphere in torus contact is used.

    Outer Ring and Outer Body Contact Property

 

     Radial Clearance: Defines the clearance in the radial direction.

     Outer Body Width: Defines the width of the outer body.

     Axial Clearance: Defines the clearance in the axial direction. This option is activated, when the user selects Front, Rear or Both as Flange.

     Flange: The user can close faces of outer body.

    None: Does not close the faces of outer body. It is possible that the shaft can get out of the outer body.

    Front: Closes the front face of outer body.

    Rear: Closes the rear face of outer body.

    Both: Closes the front and rear face of outer body.

Figure 5  Geometric information of outer body (case)

 

     Inner Slip Ratio: Defines the slip ratio for the ball and the inner ring.

     Outer Slip Ratio: Defines the slip ratio for the ball and the outer ring.

 

: Slip ratio for the roller and inner ring ()

: Slip ratio for the roller and outer ring ()

 

Figure 6  The rotational relationship between the ball and rings [Slip ratio]

 

     Each Rendering: The selected mode can be displayed in Each Render mode. For more information, click here.