Step II (In RecurDyn)

 

Step to identify plant inputs

The input of interest is the single rotational axial force is applied to the wheel Revolute Joint to move the mouse.

 

1.  Click the Plant_Input icon of the Control group in the Communicator tab. The Plant Input List dialog box appears as shown in Figure 1.

 

Figure 1  Plant Input List dialog box

 

2.  Add a plant input as the name of the actuator. For more information, click here.

3.  Add an expression function as a following figure.

 

Figure 2  Expression dialog box

 

4.  Open the dialog box of Rotational Axial force by double clicking RotationalAxial1 in the Database window. And then input the expression function defined in the upper step.

 

Figure 3  Rotational Axial force dialog box

 

Step to identify plant outputs

The output of interest is the displacement and velocity between the ball and the Mouse body pointer. This distance is in the X direction.

1.  Click the. Plant_Output icon of the Control group in the Communicator tab. The Plant Output List dialog box appears as shown in Figure 1.

 

Figure 1  Plant Output dialog box

 

2.  Add plant outputs as expression functions. For more information, click here.

At this dialog, the defined expression functions are as following figures.

 

Figure 2  Expression dialog box

 

3.  Close the RecurDyn Program after save the RecurDyn model.