Properties

 

Figure 1  Flat Belt property page [Characteristic page]

 

The Flat Belt property page is shown in Figure 1. The parameters are explained below. In order to understand the geometry, refer to Dimension Information.

 

     Height (H): Enters the height of the flat belt. The height is larger than -a.

     Width (W): Enters the width of the flat belt. The width is larger than 0.

     Segment Length (L): Enters the length of the flat belt. The length is larger than 0.

     Cord Distance (a): Enters the cord distance of the flat belt. The cord distance is smaller than 0.

     Left Connecting Position: Enters the left position of connecting force. The reference frame of the position is the geometry reference frame of the belt

     Right Connecting Position: Enters the right base position of connecting force. The reference frame of the position is the geometry reference frame of the belt