The user can imprint curves on one geometric entity in a radial pattern by the following procedure.
•Solid(Sheet), Solid(Sheet, Wire), WithDialog
•Solid(Sheet): Selects a solid or surface geometry to imprint.
•Solid(Sheet, Wire): Selects a geometry to construct a radial pattern with.
•WithDialog: Sets the rule for the imprint. The imprint curves are created by clicking OK in the Radial Imprint dialog box.
Figure 1 Radial Pattern Imprint dialog box
o Entity Name: Shows the name of the selected entity to imprint.
o Geometry: Shows the selected geometry to construct a radial pattern with to imprint
o Origin: Defines the origin of the radial pattern.
o Axis: Defines the rotation axis of the radial pattern.
o Angle: Defines the angle of the one step rotation.
o No. of Edges: Define the number of the edges to construct a radial pattern.
Figure 2 Radial Pattern Imprint
o Preview: Previews the curve to be imprinted on Working Window.
o Update: Updates the preview.
•Solid(Sheet), MultiFace, Solid(Sheet, Wire), WithDialog
•Solid(Sheet): Selects a solid or surface geometry to imprint.
•MultiFace: Select faces of selected solid or surface geometry. Only selected faces are imprinted.
•Solid(Sheet, Wire): Selects a geometry to construct a radial pattern with.
•WithDialog: Sets the rule for the imprint. For more information, click here.