Generating a RFI file

 

RecurDyn/RFlexGen supports three types of RFI generation methods which is determined by where the FE-mesh data come from. So, it is possible for users to generate a RFI file from a FFlex body, a RFlex body and the Text file (*.dat or *.bdf) by using new functions.

The RFlexGen icon is located in the Flex Interface that is between FFlex and RFlex on the Flexible tap as shown in the Figure 1 below. And, if this icon is pushed, the dialog will appear as shown in the Figure 2.

 

Figure 1  RFlexGen icon of the Flex Interface group in the Flexible tab

 

Figure 2  RFlexGen dialog box

 

     Eigen Solver: Performs an eigenvalue analysis by using the select solver.

    Sunshine

    Dynamis

     Input Data: Selects the FE-data type and Interface nodes. 3 types of Mesh Data can be used as Select Flexible Body, Nastran Bulk File, and Dynamic Input File.

     Case Control Settings: Possible to define the normal modes of a RFI file and the units that should be used about FE-Data when generating a RFI file. For more information, click here.

     Output RFI File

    RFI File Name: Defines an output RFI file name and the path where a RFI file generates.

     Export Input File: Exports a Dynamic Input File without performing an eigenvalue analysis.