The Transfer Function block implements a transfer function which is defined by
where, GAIN is the gain of the system, ZERO (·) are the zeros of the system, POLE (·) are the poles of the system. NZERO and NPOLE are the numbers of zeros and poles.
Dialog box
Figure 1 Zero-Pole dialog box
Parameters
|
Parameter(s) |
Description |
|
Zeros |
Enter the zeros of the system. If Zeros is a matrix with multiple rows, the block outputs the multiple output signals. |
|
Poles |
Enter the poles of the system. |
|
Gain |
Enter the gain of the system. |
|
Abs tolerance |
Enter the value for the Absolute tolerance. •If the Abs tolerance is inputted as -1, the value defined in the Simulation Parameter dialog box is used. •If the Abs tolerance is inputted as a value, this value is used instead of the value defined in the Simulation Parameter dialog box. |