Swing Arm Geometry Type

Figure 1  SwingArm [CamRoller – ArmPivot/HLA] Property dialog box [CamRoller – AdjustScrew Type]

Figure 2  Geometric Information

•     Arm Thickness for Cam Side: Defines a thickness of arm for Cam Side.

•     Arm Length: Defines a length of arm for Valve Side.

•     Arm Thickness: Defines a thickness of arm for Valve Side.

•     AS Diameter: Defines a diameter of Adjust Screw.

•     VS Width: Defines a width of Valve Slipper.

•     VS Length: Defines a length of Valve Slipper.

•     VS Depth: Defines a depth of Valve Slipper.

Figure 3  Geometric Information for ArmPivot Holder

•     ArmPivot Holder

•    Reference SPV

•    Holder Radius: Defines an inner radius of ArmPivot Holder.

•    Holder Radius Vertical Offset: Defines a vertical offset for center of arc.

•    Hodler Radius Horizontal Offset: Defines a horizontal offset for center of arc.

•    Holder Outer Radius: Defines an outer radius of ArmPivot Holder.

•    Holder Offset Height: Defines a height offset for ArmPivot Holder.

•    Bottom Height of Holder Contact: Defines a bottom height to contact.

•    Top Height of Holdder Contact: Defines a top height to contact.