Step I (Create a Template File for Modification Mode)

 

The user has to set up the template file to be recognized in eTemplate. In this template file, essential components are Template_Format sheet and Template_Data sheet (or Master sheet).

 

Create Template_Format sheet

     eTemplate supports three Data Processing Modes (Creation, Modification and Creation + Modification). The user must decide a mode in Template_Format sheet.

    Modulekey: Select a RecurDyn product module.

    TemplateMode: Select a parameter arrangement method.

      UserCommentColumn: Enter a value between 1 and 5 to use one of the columns between A and E in the sheet. If the user does not want to use a column, enter 0.

    TemplateDataProcessingMode: Select a mode to operate the template.

S4PARK_TDPM_Creation: If Creation Mode is selected, commands related to creation will be recognized by the second sheet (Template Data) and then will be applied to RecurDyn.

S4PARK_TDPM_Modification: If Modification Mode is selected, commands related to modification will be recognized by the second sheet (Template Data) and then will be applied to RecurDyn.

S4PARK_TDPM_CreationAndModification: If  CreationAndModification Mode is selected, commands related to creation and modification will be recognized by the second sheet (Template Data) and then will be applied to RecurDyn.