Special Outputs

 

RecurDyn/Bearing automatically generates the important outputs for a bearing system, conveniently converting the general outputs into data in order to design or analyze the system. The following table summarizes the outputs for RecurDyn/Bearing.

 

Group

Outputs

Contact_Roller

 

 

Roller#

 

##_Contact_Inner

Contact Forces between an Inner Ring and a Roller#. The x, y and z components of the translational force generalized at the center marker of the roller due to the contact force acting on the contact point of action body in its center marker’s reference frame.

##_Contact_Outer

Contact Forces between an Outer Ring and a Roller#. The x, y and z components of the translational force generalized at the center marker of the roller due to the contact force acting on the contact point of action body in its center marker’s reference frame.

Contact_Outer_Case

 

 

OuterRingUnit#

##_Contact

Contact Forces between an Outer Body and a unit of Outer Ring. The x, y and z components of the translational force generalized at the center marker of the unit of outer ring due to the contact force acting on the contact point of action body in its center marker’s reference frame.

Sum

##_Contact

Summation of each contact force between an Outer Body and an unit of Outer Ring