Simulation Command

 

Figure 1  Dynamic

 

Figure 2  Static

 

Figure 3  Eigenvalue

 

Figure 4  Frequency Response

 

Type

Parameter

Simulation Command

Dynamic

End Time

Step

 

SIM/DYN, END=5, STEP=100

Static

End Time

Step

 

SIM/STA, END=5, STEP=100

Eigenvalue

Amplitude Factor

No. of Frame

 

SIM/EIG, AMP = 1, CYCL = 30

Frequency Response

Start Freq

End Freq

Freq Step

SIM/FRA, SFREQ = 0,

EFREQ = 1000, FSTEP = 100

 

     SIM/~: Defines the Simulation type

    DYN: Dynamic Analysis

    STA: Static Analysis

    EIG: Eigenvalue Analysis

    FRA: Frequency Response

 

     END: Analysis time

     STEP: The sampling number of the simulation result

     AMP: The size factor of mode shape

     CYCL: The number of the Frame per the cycle

     SFREQ: The start frequency in Frequency Response Analysis

     EFREQ: The end frequency in Frequency Response Analysis

     FSTEP: The number of steps for results in Frequency Response Analysis

 

Note

The Frequency response analysis must be defined once in a scenario analysis.