Figure 1 Lifter Spring Case property page
• Ref Parametric Marker: Controls the position of Lifter Spring Case. It is also special parametric marker (SPM).
Figure 2 Geometric information
• Inner Diameter: Defines an inner diameter of the Lifter Spring Case.
• Case Diameter: Defines a case diameter of the Lifter Spring Case.
• Case Height: Defines a case height of the Lifter Spring Case.
• Seat Thickness: Defines a seat thickness of the Lifter Spring Case.
• Side Wall Thickness: Defines a side wall thickness of the Lifter Spring Case.
• Step Diameter: Defines a step diameter of the Lifter Spring Case.
• Step Height: Defines a step height of the Lifter Spring Case.
• Use half graphic option: This option is useful to see internal bodies. (The default is checked.)