Figure 1 Roller Guard property page [Characteristic page]
The Roller Guard property page is shown in Figure 1. The parameters are explained below. In order to understand the geometry, refer to Dimension Information.
•Length (L): Enters the length of guard.
•Height (H): Enters the height of guard.
•Inner Width (W): Enters the inner width of guard.
•Thickness (T): Enters the thickness of guard.
•Inactive: The checked guard can be inactive.
•Left Roller Guard: This is a left lateral guard.
•Right Roller Guard: This is a right lateral guard.
•Full Search: All links are searched for contact.
•Partial Search: Some links are searched for contact in some boundary. It is used to reduce total solving time.