The user can create solid geometries with the inside region of a solid geometry by the following procedure.
•Solid, WithDialog
•Solid: Select a solid geometry to use the inside region of it.
•WithDialog: Check the region to create solid geometries with them.
Figure 1 Regions dialog box
Example
Region function is to search the closed surface in one solid geometry and create the corresponding shape.
For example, Figure 2 shows a shape in which sphere and cone are subtracted in a box. This geometry has a total of three closed surface. The first is the outer surface of the box, the second is the outer surface of the sphere, and finally the outer surface of the cone.
Then, applying Region function to Geometry in Figure 2, three regions are created as shown in Figure 3.
Figure 2 Example of Closed Surface Geometry
Figure 3 Applying Region Function