Modeling Options

 

The user can create a surface geometry by the following procedure.

 

     Curve, Curve, WithDialog

    Curve: Selects a curve.

    Curve: Selects a curve to sweep along.

    WithDialog: Sets the direction about the sweep geometry. The sweep surface is created by clicking OK in the Sweep dialog box.

 

Figure 1  Sweep dialog box

 

Entity Name: Shows the name of the selected entity.

Curve: Shows the selected curve name to sweep along.

Color: Specifies the color of the surface to be created.

Tangent: If it is checked, sweep function considers the tangent of the curve.

Fixed Axis: When using Tangent option, if it is checked, the rotation around the specified axis is ignored.

Preview: Previews the surface to be created on Working Window.

Update: Update the preview.

 

     WithDialog

    WithDialog: Sweep dialog box is shown. The surface is created by clicking OK in the Sweep dialog box.

 

Figure 2  Sweep dialog box

 

Color: Specifies the color of the surface to be created.

Curve: Selects a curve to sweep the path.

Tangent: If it is checked, sweep function considers the tangent of the curve.

Fixed Axis: When using Tangent option, if it is checked, the rotation around the specified axis is ignored.

Add/Remove: Selects several edges of any geometries as the user wants to add or remove.

Add/Remove (Continuous): When using Add/Remove, if this option is checked, the connected edges within the degrees are selected together.

Tolerance (Degrees): The angle of between the connected two edges.

Preview: Previews the surface to be created on Working Window.

Update: Update the preview.