Modeling Options

 

The user can create a surface geometry by the following procedure.

 

     Point, Direction, Point, Angle, Point, Direction, Angle

    Point: Selects a point to define the arc center.

    Direction: Defines an axis direction for generating the arc.

    Point: Selects a point to define the start point of the arc.

    Angle: Defines an angle of the arc.

    Point: Selects a point to define the center point of the arc revolution.

    Direction: Defines an axis direction of the arc revolution.

    Angle: Defines a revolution angle.

 

     Circle, Point, Direction, Angle

    Circle: Selects a circular arc for the arc revolution.

    Point: Selects a point to define the center point of the arc revolution.

    Direction: Defines an axis direction of the arc revolution.

    Angle: Defines a revolution angle.

 

     Point: This option makes Arc Revolution directly. The user can modify its properties.

    Point: Selects a point to define the center point of the arc revolution. And then an arc-revolution surface is created as the default values.