Modeling Options

 

The user can create a surface geometry by the following procedure.

 

     Sheet, WithDialog

    Sheet: Selects a surface.

    WithDialog: After selecting a surface, Offset Surface dialog box is shown. The surface is created by clicking OK in the Offset Surface dialog box.

 

Figure 1  Offset Surface dialog box

 

Entity Name: Shows the name of the selected entity.

Color: Specifies the color of the surface to be created.

Offset: Defines a distance from the selected surface.

Preview: Previews the surface to be created on Working Window.

Update: Updates the preview.

 

     WithDialog

    WithDialog: Offset dialog box is shown. The surface is created by clicking OK in the Offset dialog box.

 

Figure 2  Offset dialog box

 

Color: Specifies the color of the surface to be created.

Offset: Defines a distance from the selected surface.

Add/Remove: Selects several faces of any geometries as the user wants to add or remove.

Add/Remove (Continuous): When using Add/Remove, if this option is checked, the connected faces within the degrees are selected together.

Tolerance (Degrees): The angle of between the connected two faces.

Preview: Previews the surface to be created on Working Window.

Update: Updates the preview.