Modeling Options

Figure 1  Slip Sensor icon of the Sensor group in the Belt tab

The user can create a slip sensor as follows.

•     RollerBody, Point, Distance

•    RollerBody: Selects a roller.

•    Point: Selects a point on a body to define the center of slip sensor.

•    Distance: Defines a range of region to measure output.

•    Note: The user should define the sensing target entity by using Slip Sensor property page.

•     Body, RollerBody, Point, Distance

•    Body: Selects a body to define the parent body of slip sensor.

•    RollerBody: Selects a roller.

•    Point: Selects a point on the assembly to define the center of slip sensor.

•    Distance: Defines a range of region to measure output.

•    Note: The user should define the sensing target entity by using Slip Sensor property page.

•     RollerBody, Assembled Body, Point, Distance

•    RollerBody: Selects a roller.

•    Assembled Body: Selects an assembly as a target entity.

•    Point: Selects a point on the assembly to define the center of slip sensor.

•    Distance: Defines a range of region to measure output.

•     Body, RollerBody, Assembled Body, Point, Distance

•    Body: Selects a body to define the parent body of slip sensor.

•    RollerBody: Selects a roller.

•    Assembled Body: Selects an assembly as a target entity.

•    Point: Selects a point on the assembly to define the center of slip sensor.

•    Distance: Defines a range of region to measure output.