Modeling Options

 

Figure 1  Distance Sensor icon of the Sensor group in the Belt tab

 

The user can create a distance sensor as follows.

 

     Point, Direction, Distance

    Point: Selects a point on a body to define the center of distance sensor.

    Direction: Defines a direction of distance sensor.

    Distance: Defines a range of region to measure output.

    Note: The user should define the sensing target entity by using Distance Sensor property page.

 

     Body, Point, Direction, Distance

    Body: Selects a body to define the parent body of distance sensor.

    Point: Selects a point on the assembly to define the center of distance sensor.

    Direction: Defines a direction of distance sensor.

    Distance: Defines a range of region to measure output.

    Note: The user should define the sensing target entity by using Distance Sensor property page.

 

     Assembled Body, Point, Direction, Distance

    Assembled Body: Selects an assembly as a target entity.

    Point: Selects a point on the assembly to define the center of distance sensor.

    Direction: Defines a direction of distance sensor.

    Distance: Defines a range of region to measure output.

 

     Body, Assembled Body, Point, Direction, Distance

    Body: Selects a body to define the parent body of distance sensor.

    Assembled Body: Selects an assembly as a target entity.

    Point: Selects a point on the assembly to define the center of distance sensor.

    Direction: Defines a direction of distance sensor.

    Distance: Defines a range of region to measure output.