Figure 1 Speed Sensor icon of the Sensor group in the Belt tab
The user can create a speed sensor as follows.
•Point, Direction, Distance
•Point: Selects a point on a body to define the center of speed sensor.
•Direction: Defines a direction of speed sensor.
•Distance: Defines a range of region to measure output.
•Note: The user should define the sensing target entity by using Speed Sensor property page.
•Body, Point, Direction, Distance
•Body: Selects a body to define the parent body of speed sensor.
•Point: Selects a point on the assembly to define the center of speed sensor.
•Direction: Defines a direction of speed sensor.
•Distance: Defines a range of region to measure output.
•Note: The user should define the sensing target entity by using Speed Sensor property page.
•Assembled Body, Point, Direction, Distance
•Assembled Body: Selects an assembly as a target entity.
•Point: Selects a point on the assembly to define the center of speed sensor.
•Direction: Defines a direction of speed sensor.
•Distance: Defines a range of region to measure output.
•Body, Assembled Body, Point, Direction, Distance
•Body: Selects a body to define the parent body of speed sensor.
•Assembled Body: Selects an assembly as a target entity.
•Point: Selects a point on the assembly to define the center of speed sensor.
•Direction: Defines a direction of speed sensor.
•Distance: Defines a range of region to measure output.