Modeling Options

Figure 1  Tension Sensor icon of the Sensor group in the R2R2D tab

The user can create a tension sensor as follows.

•     Point, Distance

•    Point: Selects a point on a body to define the center of tension sensor.

•    Distance: Defines a range of region to measure output.

•    Note: The user should define the sensing target entity by using Tension Sensor property page.

•     Body, Point, Distance

•    Body: Selects a body to define the parent body of tension sensor.

•    Point: Selects a point on a body to define the center of tension sensor.

•    Distance: Defines a range of region to measure output.

•    Note: The user should define the sensing target entity by using Tension Sensor property page.

•     Assembled Body, Point, Distance

•    Assembled Body: Selects a beam assembly as a target entity.

•    Point: Selects a point on a body to define the center of tension sensor.

•    Distance: Defines a range of region to measure output.

•     Body, Assembled Body, Point, Distance

•    Body: Selects a body to define the parent body of tension sensor.

•    Assembled Body: Selects a beam assembly as a target entity.

•    Point: Selects a point on a body to define the center of tension sensor.

•    Distance: Defines a range of region to measure output.