Modeling Options

The user can create a sensor by the following procedure.

•     Point, Point, Surface(PatchSet)

•    Point: Selects a point on a base body to define a location of laser sensor.

•    Point: Inputs a point. A distance and a direction of laser sensor are defined as the difference of first point and second point.

•    Surface: Selects a surface or a patch set of FFlexBody to define a target body.

•     Point, Point, Solid(PatchSet)

•    Point: Selects a point on a base body to define a location of laser sensor.

•    Point: Inputs a point. A distance and a direction of laser sensor are defined as the difference of first point and second point.

•    Solid(PatchSet): Selects a solid or a patch set of FFlexBody to define a target body.

•     Point, Point, MultiSurface(PatchSet)

•    Point: Selects a point on a base body to define a location of laser sensor.

•    Point: Inputs a point. A distance and a direction of laser sensor are defined as the difference of first point and second point.

•    MultiSurface(PatchSet): Selects some surfaces or patch sets of FFlexBody to define a target body.

•     Point, Point, MultiSolid(PatchSet)

•    Point: Selects a point on a base body to define a location of laser sensor.

•    Point: Inputs a point. A distance to limit the range of laser sensor and a direction of laser sensor are defined as the difference of first point and second point.

•    MultiSolid(PatchSet): Selects some solids or patch sets of FFlexBody to define a target body.

•     Point, Direction, Distance, Surface(PatchSet)

•    Point: Selects a point on a base body to define a location of laser sensor.

•    Direction: Defines a direction of z-axis of laser sensor.

•    Distance: Inputs a distance to limit the range of laser sensor.

•    Surface(PatchSet): Selects a surface or a patch set of FFlexBody to define a target body.

•     Point, Direction, Distance, Solid(PatchSet)

•    Point: Selects a point on a base body to define a location of laser sensor.

•    Direction: Defines a direction of z-axis of laser sensor.

•    Distance: Inputs a distance to limit the range of laser sensor.

•    Solid(PatchSet): Selects a solid or a patch set of FFlexBody to define a target body.

•     Point, Direction, Distance, MultiSurface(PatchSet)

•    Point: Selects a point on a base body to define a location of laser sensor.

•    Direction: Defines a direction of z-axis of laser sensor.

•    Distance: Inputs a distance to limit the range of laser sensor.

•    MultiSurface(PatchSet): Selects some surfaces or patch sets of FFlexBody to define a target body.

•     Point, Direction, Distance, MultiSolid(PatchSet)

•    Point: Selects a point on a base body to define a location of laser sensor.

•    Direction: Defines a direction of z-axis of laser sensor.

•    Distance: Inputs a distance to limit the range of laser sensor.

•    MultiSolid(PatchSet): Selects some solids or patch sets of FFlexBody to define a target body.

•     Body, Point, Direction, Distance, Surface(PatchSet)

•    Body: Selects a body to define the parent body of laser sensor.

•    Point: Selects a point on a base body to define a location of laser sensor.

•    Direction: Defines a direction of z-axis of laser sensor.

•    Distance: Inputs a distance to limit the range of laser sensor.

•    Surface(PatchSet): Selects a surface or a patch set of FFlexBody to define a target body.

•     Body, Point, Direction, Distance, Solid(PatchSet)

•    Body: Selects a body to define the parent body of laser sensor.

•    Point: Selects a point on a base body to define a location of laser sensor.

•    Direction: Defines a direction of z-axis of laser sensor.

•    Distance: Inputs a distance to limit the range of laser sensor.

•    Solid(PatchSet): Selects a solid or a patch set of FFlexBody to define a target body.

•     Body, Point, Direction, Distance, MultiSurface(PatchSet)

•    Body: Selects a body to define the parent body of laser sensor.

•    Point: Selects a point on a base body to define a location of laser sensor.

•    Direction: Defines a direction of z-axis of laser sensor.

•    Distance: Inputs a distance to limit the range of laser sensor.

•    MultiSurface (PatchSet): Selects some surfaces or patch sets of FFlexBody to define a target body.

•     Body, Point, Direction, Distance, MultiSolid(PatchSet)

•    Body: Selects a body to define the parent body of laser sensor.

•    Point: Selects a point on a base body to define a location of laser sensor.

•    Direction: Defines a direction of z-axis of laser sensor.

•    Distance: Inputs a distance to limit the range of laser sensor.

•    MultiSolid (PatchSet): Selects some solids or patch sets of FFlexBody to define a target body.