Figure 1 Parameter for Eigenvalue analysis
Parameter |
EigenPara command | |
Max number of mode |
Including damping (Damped/Undamped) |
EIGPARA/MAXMODE=10, DAMP=FALSE |
• EIGPARA: Parameter for Eigenvalue analysis
• MAXMODE: Max. no. of modes
• DAMP
• “DAMP=FALSE” means undamped eigenvalue analysis without damping matrix.
• “DAMP=TRUE” means damped eigenvalue analysis with damping matrix.
Note
This command is eigenvalue analysis option
You must define the EigenParameter command prior to the EigenValue Analysis command