This page changes the relation of force entity for base and action bodies.
Figure 1 Force property page [Connector page]
•Base and Action Marker: All points are measured with respect to Inertia Marker of ground.
•Name: Defines the name of maker.
•Body: Defines the mother body of marker.
•Ref Frame: Defines the reference frame of force. The origin and orientation are measured with respect to the reference frame.
•Origin: Defines the origin of marker.
•Euler Angle: Select 321 or 313 Euler Angles.
o The euler angle can be defined as a parametric value. If the user inputs the parametric value, the unit is Radian. Therefore, if the user wants to input a degree value, the user must add the "D" character such as "90D" in Parametric Value.
•Copy Base to Action: Copy the origin or orientation of the base marker to action marker.
•Copy Action to Base: Copy the origin or orientation of the action marker to base marker.
•Copy options:
o All: Copy the origin and the orientation
o Origin: Copy only the origin
o Orientation: Copy only the orientation