A chirp signal is a sinusoid whose frequency changes linearly from an initial value to a target one. The Chirp block outputs a chirp signal by the following equation.
where,
t is the simulation time.
y is the output.
Dialog box
Figure 1 Chirp dialog box
Parameters
|
Parameter(s) |
Description | |
|
Initial Frequency |
finitial |
Enter the Initial frequency of the signal. |
|
Target Time |
ttarget |
Enter the Time at which the frequency of the signal reaches ftarget. |
|
Frequency at Target Time |
ftarget |
Enter the Frequency of the signal at the target time. |