In the Export dialog box, options regarding to CAD Export are supported with a sub dialog as Advanced Options.
•Translate Free Curves: This option controls the translation of free curves and wire bodies. Set this option to true to enable the translation of free curve data and wire bodies in the destination format.
•Translate Free Surfaces: This option controls the translation of free surface data. Set this option to true to indicate that Translator is to read and translate free surface data.
•Disable Hybrid Body: CATIA V5 understands the concept of a hybrid body. By default, all sheet, wire, and point entities are written with solid bodies under the same Part Body set. If this option is set to true, sheet, wire and point entities from the source document will be written in a separate Geometrical Set and solid bodies will be written in a Part Body set in CATPart.
•Options files
o optionsPStoAC.txt : options to export ACIS files
o optionsPStoCAT.txt : options to export CATIA files
o optionsPStoIG.txt : options to export IGES files
o Default option files are installed in “<Install Dir>\Translator”.
o When import or export CAD files, these files will be copied in “User\Documents\RecurDyn Version\Translator”.
o If you want to modify CAD options, use option files in “User\Documents\RecurDyn Version\Translator”.