Belt

 

Figure 1  Belt example

 

RecurDyn/Belt is used to model the belt systems and pulley systems of various types and configurations. Typical applications of RecurDyn/Belt include modeling and engine Front End Accessory Drive (FEAD) system consist of the Ribbed V-belt, Ribbed V-pulley, and Roller. Continuously variable transmission (CVT) system uses Roller, Flange, V-pulley and V-belt. A Timing belt mechanism consists of Roller, Timing pulley, Timing belt.

RecurDyn/Belt has two methods for simulating the belt system.

 

     Segment’ method: Uses the TRKG-alpha integrator.

     Element’ method: Uses the Hybrid integrator.

 

Step to create a belt system in segment assembly mode

1.  Create a belt segment.

2.  Create a pulley(s).

3.  Assemble a belt system.

4.  Define the connector force parameters.

5.  Define the contact parameters.

6.  Run the simulation.

 

Step to create a belt system in element assembly mode

1.  Create a roller(s).

2.  Assemble a belt system.

3.  Define the element force parameters.

4.  Define the contact parameters.

5.  Run the simulation.